The IASTED International Conference on Control and Applications (CA 2005)

Venue: Cancun

Location: Cancun, Mexico

Event Date/Time: May 18, 2005 End Date/Time: May 20, 2005
Abstract Submission Date: Dec 15, 2005
Report as Spam

Description

SPONSORS
The International Association of Science and Technology for Development (IASTED)
Technical Committee on Control

CONFERENCE CHAIR
Dr. Rafael Castro-Linares – CINVESTAV-IPN, Mexico

TUTORIAL CHAIR
Prof. Jose Mireles Jr. – Autonomous University of Ciudad Juárez


PURPOSE
The IASTED International Conference on Control and Applications (CA 2005) will act as a major forum for international researchers and practitioners interested in all areas of control and applications. It will be an opportunity to present and observe the latest research, results, and ideas in these areas. All papers submitted to this conference will be peer evaluated by at least two reviewers. Acceptance will be based primarily on originality and contribution.

CA 2005 will be held in conjunction with the IASTED International Conference on Modelling and Simulation (MS 2005).


LOCATION
CA 2005 will be held in the beautiful resort city of Cancun at the luxurious Westin Regina Resort. Fourteen miles of sugar-white sand, lapped by the turquoise and emerald waters of the Caribbean, make Cancun one of the world’s most popular travel destinations. Besides its superlative swimming and snorkeling, Cancun is also the gateway to the ruins and cultural treasures of Ancient Mexico. The nearby city of Chichen Itza, with its 75-foot pyramid built in honor of the god Kukulcán, is the most famous Mayan cultural site in the world. Another notable site nearby is the ancient walled city of Tulum, believed by archeologists to be an important ceremonial and trade center for the Mayan people. Cancun also boasts many ecological wonders, including the nearby Sian Ka’an Biosphere Reserve and the coves and caves of Xcaret.

SCOPE
Topics will include, but are not limited to, the following:

Control Theory
Stability
Linear Control
Non-linear Control
Optimization
Identification and Estimation
Intelligent Control
Adaptive Control
Predictive Control
Fuzzy Control
Control using Neural Networks
Genetic Algorithms
Process Control
Re-configurable Control Systems
Stochastic Control


Robust Control
Variable Structure Control
Virtual Reality in Control
Robotics
Real Time Systems
Fault Detection
Modelling and Simulation
Control Education
Discrete Events and Hybrid Systems
Mechatronics
Bio-engineering
Environmental Systems
Vehicles and Transportation Systems
Power Systems Applications
Control of Distributed Parameter Systems



INTERNATIONAL PROGRAM COMMITTEE
A.M. Agogino – University of California, Berkley, USA
A. Alasty – Sharif University of Technology, Iran
I. Al-Bahadly – Massey University, New Zealand
M. Aldeen – University of Melbourne, Australia
F. Allgower – University of Stuttgart, Germany
F.M. Al-Sunni – King Fahd University of Petroleum and Minerals, Saudi Arabia
S.P. Banks – University of Sheffield, UK
R.W. Beard – Brigham Young University, USA
J.M. Berg – Texas Tech University, USA
O.S. Bogosyan – University of Alaska Fairbanks, USA
J. Bokor – Hungarian Academy of Sciences, Hungary
M. Boumedine – University of the Virgin Islands, US Virgin Islands
D. Cai – Iwate Prefectural University, Japan
F.-R. Chang – National Taiwan University, Taiwan
C.-L. Chen – National Cheng Kung University, Taiwan
J. Chen – University of California, Riverside, USA
X. Chen – Shibaura Institute of Technology, Japan
Y.-H. Chen – Georgia Institute of Technology, USA
G.T.-C. Chiu – Purdue University, USA
Y. Cui – TCL Corporation Components SBU, PRC
J. Dayan – Technion - Israel Institute of Technology, Israel
R.A. de Callafon – University of California, San Diego, USA
J. de Leon Morales – University of Nuevo Leon, Mexico
R. Devanathan – Dr. MGR Deemed University, India
A. Dourado – University of Coimbra, Portugal
M.J. Er – Nanyang Technological University, Singapore
J.A.M. Felippe de Souza – University Beira Interior, Portugal
J. Fernandez de Canete – University of Málaga, Spain
I. Godler – University of Kitakyushu, Japan
H.G. Gonzalez-Hernandez – CICESE, Mexico
K.M. Grigoriadis – University of Houston, USA
A. Guez – Drexel University, USA
L.E. Holloway – University of Kentucky, USA
N. Hovakimyan – Virginia Polytechnic Institute and State University, USA
C.-C. Hsu – St. John's and St. Mary's Institute of Technology, Taiwan
H. Hu – University of Essex, UK
H. Jaddu – Al-Quds University, Israel
G. James – Coventry University, UK
K. Jezernik – University of Maribor, Slovenia
Y. Jin – Honda Research Institute Europe, Germany
J.-G. Juang – National Taiwan Ocean University, Taiwan
A.G. Kelkar – Iowa State University, USA
J.-P. Kenné – University of Quebec, Canada
U. Kortela – University of Oulu, Finland
A. Kugi – Saarland University, Germany
I. Lasiecka – University of Virginia, USA
F.L. Lewis – University of Texas at Arlington, USA
Z. Lin – University of Virginia, USA
H.H.T. Liu – University of Toronto, Canada
S. Lloyd – Massachusetts Institute of Technology, USA
Y.-S. Lu – National Yunlin University of Science and Technology, Taiwan
J.L. Martínez Rodríguez – University of Málaga, Spain
D. Nesic – University of Melbourne, Australia
A.W. Ordys – University of Strathclyde, UK
S. Ozcelik – Texas A&M University Kingsville, USA
B. Pasik-Duncan – University of Kansas, USA
K. Poolla – University of California, Berkeley, USA
H.R. Pota – University of New South Wales, Australia
A.B. Rad – Hong Kong Polytechnic University, PRC
G. Romero-Galván – Autonomous University of Tamaulipas, Mexico
M. Rouff – University of Caen Basse-Normandie, France
J.J. Ruiz León – CINVESTAV-Guadalajara, Mexico
I. Rusnak – RAFAEL, Israel
A. Sala-Piqueras – Polytechnic University of Valencia, Spain
R. Sanz – Polytechnic University of Madrid, Spain
J. Sasiadek – Carleton University, Canada
M. Sebek – Czech Technical University in Prague, Czech Republic
M. Shafiq – King Fahd University of Petroleum and Minerals, Saudi Arabia
M. Shiraishi – Ibaraki University, Japan
A.M. Shkel – University of California, Irvine, USA
S. Singh – University of Calgary, Canada
J. Smieja – Silesian University of Technology, Poland
B. Sohlberg – Dalarna University, Sweden
J. Stecha – Czech Technical University, Czech Republic
P.G. Stewart – University of Sheffield, UK
A.R. Stubberud – University of California, Irvine, USA
C.-Y. Su – Concordia University, Canada
A.H. Sung – New Mexico Institute of Mining and Technology, USA
K.K. Tan – National University of Singapore, Singapore
N. Tan – Inonu University, Turkey
G. Tao – University of Virginia, USA
J.H. Taylor – University of New Brunswick, Canada
M. Velez-Reyes – University of Puerto Rico at Mayaguez, Puerto Rico
S.M. Veres – University of Southampton, UK
J. Vittek – Zilina University, Slovak Republic
M. Vukobratovic – University of Belgrade, Serbia and Montenegro
Q.-G. Wang – National University of Singapore, Singapore
Y. Wang – Nanyang Technological University, Singapore
Z. Wang – National University of Singapore, Singapore
Z. Wang – Brunel University, UK
K. Wojciechowski – Silesian University of Technology, Poland
L. Xu – Ford Motor Company, USA
T. Yamamoto – Hiroshima University, Japan
E.E. Yaz – Marquette University, USA
K. Youcef-Toumi – Massachusetts Institute of Technology, USA
W. Yu – CINVESTAV-IPN, Mexico
X. Yu – Royal Melbourne Institute of Technology, Australia
T. Yuan – Nanyang Technological University, Singapore


SUBMISSION OF PAPERS
Initial Paper
Submit your paper via our website at:
http://iasted.org/conferences/2005/cancun/submit-460.htm. All submissions should be in Adobe Acrobat (.pdf), Postscript (.ps), or MS Word (.doc) format. The IASTED Secretariat must receive your paper by December 15, 2004. Receipt of paper submission will be confirmed by email.

Complete the online initial paper submission form designating an author who will attend the conference and providing four key words to indicate the subject area of your paper. One of the key words must be taken from the list of topics provided under Scope. Initial paper submissions should be approximately six pages. Formatting instructions are available at: http://www.iasted.org/formatting-initial.htm.

Notification of acceptance will be sent via email by February 1, 2005. Final manuscripts are due by March 25, 2005. Registration and final payment are due by April 1, 2005. Late registration fees or paper submissions will result in the papers being excluded from the conference proceedings.

Final Papers
Send your final manuscripts via email to: finalpapers@iasted.org. The subject line for the final manuscript submission must include your six-digit paper number. The formatting instructions can be found at: http://www.iasted.org/formatting-final.htm and must be strictly followed. The page limit for final papers is six single-spaced pages in 10 point Times New Roman font. Only one paper of up to six pages is included in the regular registration fee. There will be an added charge for extra pages and additional papers.

JOURNALS
Papers accepted to the conference may be submitted for review for inclusion in one of the IASTED International Journals published by ACTA Press. Authors must submit an expanded version of their conference papers for peer review consideration to: http://www.actapress.com/journals/submission.htm following the standard procedure as described on the website: http://www.actapress.com. All papers considered for peer review for the journals must be of the highest quality and demonstrate a novel contribution to the literature.

TUTORIALS
Proposals for half-day tutorials (three hours) should be submitted online by December 15, 2004. Tutorials are to be submitted via the following website address:
http://www.iasted.org/conferences/2005/cancun/tutorialsubmit-460.htm. A tutorial proposal should clearly indicate the topic, background knowledge expected of the participants, objectives, time allocations for the major course topics, and the qualifications of the instructor(s).

SPECIAL SESSIONS
Persons wishing to organize a special session should submit a proposal via e-mail to calgary@iasted.org by December 15, 2004. Proposals should include a minimum of five papers, a session title, a list of the topics covered, and the qualifications and brief biography of the session organizer(s). The name of the session organizer will appear in the program and proceedings provided five or more papers are presented. More information on special sessions is available online at the following website address:
http://www.iasted.org/conferences/2005/cancun/sessionsubmit-460.htm.



IMPORTANT DEADLINES
Submissions due December 15, 2004
Notification of acceptance February 1, 2005
Camera-ready manuscripts due March 25, 2005
Registration Deadline April 1, 2005



For more information, or to be placed on our mailing list, please contact:
IASTED Secretariat - CA 2005
#80, 4500 - 16th Avenue N.W.
Calgary, Alberta
Canada T3B 0M6
Tel: 403-288-1195
Fax: 403-247-6851
E-mail: calgary@iasted.org
Website: http://www.iasted.org





Back to the CA 2005 Home Page














































































































































































































































Conferences | Membership | Publications | FAQs | Contact Us | Site Map | Home
© Copyright 2005 IASTED www.iasted.org Site Designed by Virtual Apex Internet Solutions

Venue