|
|
|
|
|
|
|
|
|
|
| Email |
icmpm2005@yahoo.co.in
|
|
| Category |
Science: Engineering
|
|
| Category 2 |
Science: Mechanical
|
|
| Category 3 |
Science: Technology
|
|
|
|
|
| Contact |
Bannari Amman Institute of Technology
Sathyamangalam - 638 401
Tamil Nadu
India
|
|
|
|
|
|
| Description |
BANNARI AMMAN INSTITUTE OF TECHNOLOGY (BIT)
The BIT, Sathyamangalam established in the year 1996 is the fruit of dedicated efforts of Sri S V Bala Subramaniam, Chairman, Bannari Amman Group to establish a Centre of Excellence in Engineering & Technology. The BIT currently offers 10 UG and 7 PG programs in Engineering, Technology and Science. The Institute is approved by All India Council for Technical Education (AICTE), New Delhi and is affiliated to Anna University. The Institute has been accredited by the National Board of Accreditation (NBA), New Delhi and ISO 9001:2000 certified by TUV. The Institute has received research grants from funding agencies like DST, DRDO, etc. The Department of Mechanical Engineering offers one UG program (B.E. Mechanical Engineering) and two PG programs (M.E. Engineering Design and M.E. Computer Integrated Manufacturing). The Department has organized a National Conference on Advances in Engineering Design in April 2005 and more than 18 short-term training programmes in association with organizations like AICTE, ISTE, MoEF, TEDA, etc.
NORTH CAROLINA A&T STATE UNIVERSITY (NC A&T SU)
Since its inception in 1891, NC A&T SU has a rich tradition of leadership and achievement. The University offers 85 undergraduate programs, 45 Masters programs and five Ph.D. programs. The College of Engineering is one of the seven colleges and schools in the University. It has five academic Departments that offer eight undergraduate, nine graduate degree programs and three Ph.D. degrees-in Mechanical, Electrical and Industrial Engineering. The programs (agricultural, architectural, chemical, civil, computer science, electrical, industrial and mechanical) are fully accredited by the Accreditation Board for Engineering and Technology (ABET). The college has established research centers with funding from the NSF, DoD, NASA and others. The Center for Advanced Materials and Smart Structures (CAMSS) is an educational and research resource of excellence in the field of smart, multifunctional and other advanced materials. This is being achieved through the collaboration of academe, government agencies and private industries in developing basic and applied research programs and commercially relevant technological innovations with a focus on student participation and learning.
ABOUT THE CONFERENCE
The major challenge for the today’s industries is to satisfy the needs of the customers by providing new and innovative products in the global market. This requires application of the knowledge of latest tools and technology in design, manufacture, material processing and related areas. It is necessary for the personnel from the Industry, R&D organizations, and Academic Institutions to meet and exchange the advances in the respective fields.
The conference acts as a forum to bring the academicians, researchers and practising engineers together for sharing their knowledge and experience in the following areas.
1. Design, process, and application of new materials for engineering problems
2. Design and manufacture of products / components economically with global quality standards
3. Modernization of manufacturing processes and systems which will meet the requirements of dynamic environments
The technical program includes invited keynote addresses, plenary sessions, and presentation sessions.
CONFERENCE TOPICS
Newer Materials and Processing Technologies
Composite Materials (PMC, MMC, CMC)
Shape Memory Alloy
Smart Materials
Nuclear Materials
Micro / Nano Materials
Bio-Materials
Computer Aided Design of New Materials
Powder Metallurgy
Surface Coating and Thin Flims
Testing and Evaluation of Materials
Materials Joining and Machining
Environmental Degradation of Materials
Product Design and Development
Engineering Design Methodology and Conceptual Design
Creativity, Innovation, Aesthetics, and Ergonomics in Design
Product Portfolio, Styling, Planning, and Reliability
Geometric Modeling, CAD, and Translators
Tolerance Analysis and Synthesis
Virtual Reality in Product Design
PDM, PLM, and CPC
Design for Manufacture and Assembly
Design for Environment, Reuse, Safety, and Appropriate Technology
FEA, and CFD
Fatigue, and Fracture Analysis
Reverse Engineering
MEMS / NEMS
Design of Components using Newer Materials
Tribology, Vibration, Dynamic Considerations and Condition Monitoring
Built-in Intelligence in Products
Product Disposal and Recycling
Modern Manufacturing Systems and IE Practices
Robotics, and Automated Systems
Sensors, and Mechatronics
Surface Mounting Technology
Process Instrumentation, and Controls
Virtual Instrumentation
Intelligent Manufacturing
Rapid Prototyping, Manufacturing, and Tooling
E-manufacturing, ERP, and Integrated Factory
Plant Layout, and Material Handling Systems
Sequencing, and Scheduling
Virtual Manufacturing, and Simulation
Operations, and Production Management
Precision Engineering, and Concurrent Engineering
JIT, Lean, and Agile Manufacturing
BPR, and Reliability Engineering
Value Engineering, and TQM / TPM
Transportation Logistics, and Supply Chain Management
DSS, ES and AI in Manufacturing
Engineering Optimization
Taguchi Method
Simulated Annealing
Response Surface Methodology
Genetic Algorithm
Ant Colony Algorithm
Neural Network
Fuzzy Logic
Case Studies
Automobile Engineering
Aerospace Engineering
Medical Engineering
Structural Engineering
Textile Technology
… any other topic relevant to the conference
|
|
| Additional Information |
INTERNATIONAL ADVISORY COMMITTEE
Dr.N.Radhakrishnan, Vice-Chancellor, Research and Economic Development,NC A&T SU, USA
Dr.J.Sankar, Professor and Director, Center for Advanced Materials and Smart Structures, NC A&T SU, USA
Dr.A.Gunasekaran, Professor, University of Massachusetts, USA
Dr.S. Heragu, Professor, Rensselaer Polytechnic Institute, USA
Dr.Tan Kay Chen, Associate Professor, NUS, Singapore
Dr.Md Abdul Maleque, Associate Professor, MMU, Malaysia
Dr.George Ioannou, Assistant Professor, AUEB, Greece
Dr.S.G.Ponnambalam, Senior Lecturer, Monash University, Malaysia
Dr.S.Arunachalam, Senior Lecturer, University of East London, UK
Dr. Sheik Meeran, Senior Lecturer, University of Bath, UK
NATIONAL ADVISORY COMMITTEE
Dr.S.Vijayarangan, Principal, PSG College of Technology, Coimbatore
Dr.N.S.Parthasarathy, Director (Research), Anna University, Chennai
Dr.Kalyanmoy Deb, Professor, IIT, Kanpur
Dr.B.Ramamoorthy, Professor, IIT, Madras
Dr.C.Jebaraj, Professor, Anna University, Chennai
Dr.P.V.Mohanram, Dean, PSG College of Technology, Coimbatore
Dr.V.Selladurai, Professor, Coimbatore Institute of Tech., Coimbatore
Dr.C.Rajendran, Professor, IIT, Madras
Dr.P.Seshu, Associate Professor, IIT, Bombay Dr.R.Gnanamoorthy, Associate Professor, IIT, Madras
Dr.R.M.Pillai, Senior Deputy Director and Head, RRL, Thiruvananthapuram
Sri.V.Gnanagandhi, Associate Director, LPSC, ISRO, Thiruvananthapuram
Sri.O.P.Khanna, National Chairman, IIPE, Bangalore
Sri.T.S.Ramani Sankar, Chief Architect, Sankar Associates, Coimbatore
Dr.G.Ranganathan, CEO, ROVER Components Ltd., Coimbatore
Dr.S.Manivasagam, Head (Engg.), Tooltech Software (India) Pvt. Ltd., Pune
ORGANIZING COMMITTEE
PATRONS
Sri S. V. Bala Subramaniam, Chairman, Bannari Amman Group
Dr. S. K. Sundararaman, Director, Bannari Amman Institute of Technology
Chairman : Dr. A. Shanmugam, Principal, BIT
Co-Chairman : Dr. C. Sivanandan, Dean, Dept. of Mech. Engg.
Organizing Secretaries : Dr. I. Rajendran and K. Balamurugan
Treasurers : Prof. M. Sakthivel and Prof. N. Natarajan
|
|
