Petroleum Engineering for Non-Engineers - PEICE
|Event Date/Time: Sep 19, 2011||End Date/Time: Sep 23, 2011|
|Registration Date: Sep 19, 2011|
|Early Registration Date: Sep 19, 2011|
This five-day course is designed to provide non-engineering petroleum industry technical professionals with a thorough overview of most key aspects of petroleum engineering technology and its applications. The course addresses engineering issues ranging from initial involvement with explorationists to production optimization challenges. The sessions will focus on relevant and practical issues, and will include a combination of classroom exercises and basic engineering problems.
A complete set of course materials and lunches are included.
Basic Petroleum Geology
Reservoir Fluid and Rock Properties
Fundamentals of Reservoir Fluid Flow
Oil and Gas Reservoir Classification
Oil and Gas Reservoir Delineation and Development
Well Completions and Workovers
Casing and Cementing
Production Operations and Optimization
Primary Recovery Mechanisms
Enhanced Recovery Mechanisms
Instructor(s): Roger Hough / Saad Ibrahim, P. Eng.
Roger Hough has over 42 years experience in the oilfield. Since retiring in 1999 he has been teaching industry courses on well technology and competitive technical intelligence. He also teaches drilling technology at the University of Calgary. Roger joined Shell in 1967 after graduating with a BSc. degree in Applied Mineral Sciences from the University of Leeds in the UK. He worked for Shell International for 32 years, and served in the UK, Italy, Malta, Brunei, Oman, Netherlands, Canada, and Venezuela. His early career was focussed on Operations Engineering which principally involved well construction, whilst latterly has held the positions of Research Manager for well technology at the Shell International research centre in Rijswijk in The Netherlands, Petroleum Engineering Manager for Shell Canada, and Operations Manager for Shell Venezuela. He also served as Senior Manager responsible for intellectual property management for Shell International. He has been active with the Society of Petroleum Engineers (SPE) over many years, and has been Programme Chair for Offshore Europe and Europec, as well as serving on numerous other SPE committees. He was a SPE Distinguished lecturer on the topic of Slim Hole Drilling, lecturing in Europe, North America and the Far East. He recently received the SPE Distinguished Member award, which is limited to 1% of the SPE membership worldwide. He currently serves as a Board member for the Calgary section of the SPE and is a member of the SPE Continuing Education Committee.
Saad Ibrahim has over 30 years of diversified experience in the Petroleum Industry in Western Canada and internationally, including projects in Libya, Yemen, Kazakstan, Venezuela and Argentina, with special expertise in reservoir engineering with emphasis on field development planning, evaluation of depletion strategies and production optimization of a wide spectrum of oil and gas fields. Other interests include well test planning and analysis using state of the art commercially-available software; the implementation of secondary and tertiary recovery schemes; and technical and economic evaluations of oil and gas properties for acquisition and divestiture ventures. He graduated from the University of Alexandria (Egypt) with B.Sc. in Mechanical Engineering in 1973, and obtained a post-graduate diploma from the University of Calgary in Chemical and Petroleum Engineering in 1983. Saad is a member of the APEGGA, SPE and CIM.
Need more information about this course from the instructor(s)? click here
Delivery Method: Classroom Training
Fee: $ 2995 CAD
Location Calgary, AB
CEU: 4 Continuing Education Units
PDH: 40 Professional Development Hours
Sessions: Date Start Time - End Time
1. Monday, September 19, 2011 8:30 AM - 4:30 PM
2. Tuesday, September 20, 2011 8:30 AM - 4:30 PM
3. Wednesday, September 21, 2011 8:30 AM - 4:30 PM
4. Thursday, September 22, 2011 8:30 AM - 4:30 PM
5. Friday, September 23, 2011 8:30 AM - 4:30 PM